What to do if Electro-Voice ELX115P have crackling or distortion?
If your Electro-Voice Speakers have intermittent output, like crackling or distortion, check all connections at the amplifier and speakers to ensure they are clean and tight. If the problem persists, the issue might be in the amplifier or wiring. Refer to the troubleshooting steps for 'No Sound'.
Why is there distortion from Electro-Voice ELX115P when the LIMIT LED is not blinking?
If your Electro-Voice Speakers' sound is distorted, and the LIMIT LED is not blinking, the source input (mixing console/preamp) might be overdriven. Verify that the level controls of the source are properly structured.
General| Product color | Black |
|---|---|
| Housing material | MDF, Steel |
| Recommended usage | Universal |
| Suitable for outdoor use | - |
| Woofer | Yes |
| Tweeter | No |
| Speaker type | 2-way |
| Driver diameter | 39 mm |
| Woofer diameter | 381 mm |
| Number of drivers | 2 |
| Speaker placement | Floor |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 15 \ |
| Subwoofer driver diameter (imperial) | 1.5 \ |
| Impedance | 8 Ω |
| Sensitivity | 134 dB |
| Frequency range | 44 - 20000 Hz |
| RMS rated power | 1000 W |
| Crossover frequency | 1700 Hz |
| Speaker grille | 18GA |
| Speakon ports quantity | 1 |
| Connectivity technology | Wired |
| Package weight | 29500 g |
Weight and Dimensions| Depth | 382 mm |
|---|---|
| Width | 432 mm |
| Height | 708 mm |
| Weight | 22500 g |
Key warnings regarding electrical shock, fire risk, and proper usage.
Details on FCC rules and potential radio frequency interference for the device.
Guidelines for using loudspeakers in sunny or wet environments and maximum temperature limits.
Cautionary advice on high sound pressure levels and potential hearing damage.
Detailed specifications and capabilities for the 12-inch and 15-inch powered loudspeakers.
Key features and specifications for the 18-inch powered subwoofer.
Instructions for placing and securing loudspeakers for stage monitoring use.
Instructions for mounting loudspeakers on tripod stands and stacking with subwoofers.
Introduction to the controls and connectors on the Live X amplifier panels.
Details on MAINS IN, POWER switch, XLR/TRS inputs, MIC/LINE selection, and RCA inputs.
Explanation of tone, level adjustments, limit indicators, and signal routing options.
Illustrates connecting multiple full-range systems using link outputs.
Shows how to configure full-range systems for use as stage monitors.
Diagram for setting up full-range speakers stacked on subwoofers.
Detailed technical specifications for ELX112P, ELX115P, and ELX118P models.
Diagrams showing the physical dimensions of ELX112P, ELX115P, and ELX118P.
Visual representation of the frequency response characteristics for each model.
A table listing system models, coverage, finish, voltage, and part numbers.
Common problems and their solutions for the Live X powered loudspeakers.
A blank page intended for user notes.
To Next Page
