Why do Electro-Voice speakers have a constant buzzing noise?
If your Electro-Voice speakers produce constant noise like buzzing, hissing, or humming, and no program material is playing, the issue likely stems from the signal chain within the electronics. Evaluate each component to isolate the problem. Also, check and correct the system grounding, as required, to resolve potential ground loop issues.
Why do Electro-Voice speakers have poor low frequency response?
If your Electro-Voice speakers have poor low frequency response, carefully observe the wire markings or tracers to ensure that the speakers are not wired out-of-polarity.
What to do if Electro-Voice speakers have no sound from the amplifier?
If there's no sound from your Electro-Voice speakers, first connect a working test speaker to the amplifier outputs to isolate the issue. If there's still no sound, ensure all electronics are powered on, signal routing is correct, the source is active, and the volume is adequately adjusted. If sound is present with the test speaker, the problem lies within the wiring. To troubleshoot wiring, verify that you have connected the correct wire pairs to the amplifier. Play something at low level through the amplifier. Connect the test speaker in parallel with the malfunctioning line. If the sound level has gone or is very weak, the line has a short in it. If the sound level is normal, the wire is open. Using the test speaker, move down the line and test each connection/junction until you find th...
Crucial safety guidelines and warnings for the operation and handling of Electro-Voice Live X loudspeakers.
Operational precautions for Live X loudspeakers, covering environmental conditions and hearing protection.
Overview of the Electro-Voice Live X passive loudspeaker series and its performance capabilities.
Key features of the Live X passive loudspeaker series, including driver types and cabinet construction.
Detailed description of the ELX112 model, its specifications and applications.
Detailed description of the ELX115 model, its specifications and applications.
Guidelines for using Live X loudspeakers as floor monitors, including placement and cable management.
Instructions for mounting Live X loudspeakers on tripod stands and ensuring stability.
Diagram and explanation for setting up a basic stereo system with ELX112 or ELX115 loudspeakers.
Configuration for integrating ELX118 subwoofers with full-range speakers for enhanced low-frequency performance.
Diagram and explanation for setting up a stereo system using ELX215 dual 15" loudspeakers.
Guidance on configuring multiple ELX112 or ELX115 speakers for stage monitor applications.
Detailed technical specifications table for all Live X loudspeaker models.
List of compatible accessories for the Live X series, including tripod stands.
Detailed dimensional drawings for the ELX112 and ELX115 loudspeaker models.
Detailed dimensional drawings for the ELX118 and ELX215 loudspeaker models.
Graphical representation of frequency response and impedance for each Live X model.
Summary table of Live X models, coverage, finish, and part numbers.
General| Power Handling (Continuous/Peak) | 250 W / 1000 W |
|---|---|
| Impedance | 8 ohms |
| Enclosure Material | 15 mm Plywood |
| Height | 25.5 in (648 mm) |
| Width | 14.5 in (368 mm) |
| Depth | 13.5 in (343 mm) |
| Coverage (Nominal -6 dB) H | 90° |
| Coverage Pattern | 90° x 60° |
| Type | 2-way full-range |
| LF Transducer | 12" Woofer |
| HF Transducer | 1.5" Titanium Compression Driver |
| Connectors | 2 x Neutrik NL4MP Speakon |
| Grill | Steel |
| Coverage (Nominal -6 dB) V | 60 degrees |
| Power Handling | 250 W |
| LF Driver | 12" Woofer |
| HF Driver | 1.5" Titanium Compression Driver |
| Input Connectors | 2 x Neutrik NL4MP Speakon |
| Output Connectors | Dual NL4 |
| Weight Net | 16.8 kg (37 lbs) |
| Weight | 16.8 kg (37 lbs) |
To Next Page