Electro-Voice LiveX ELX112 - Using multiple ELX112 s or ELX115 s as stage monitors

Electro-Voice Live X Series Passive Owner’s Manual
Recommended Configurations (cont’)
Using multiple ELX112’s or ELX115’s as stage monitors
Mixer
Q66
"NQMJ¾FS
0VUQVU"
ELX112’s or ELX115’s (Monitor Position)
0VUQVU#
*OQVU"
*OQVU#
45 Hz
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 8 Ohms 7 Ohms
2 4 Ohms 3.5 Ohms
3 2.7 Ohms 2.3 Ohms
4 2 Ohms 1.8 Ohms
Caution: Do not exceed the
maximum load rating of
the amplifier.
low pass
filter (from
mixer or
processor)
NL4 Pin Configuration
1JOTBOE Used
1JOTBOE /PU6TFE