Electro-Voice LiveX ELX112 - Linking ELX118 subwoofers to ELX112 s or ELX115 s

Electro-Voice Live X Series Passive Owner’s Manual8
Recommended Configurations (cont’)
Linking ELX118 subwoofers to ELX112’s or ELX115’s
This configuration allows a user to increase the low frequency performance without using additional ampli-
fier channels.
Mixer
Q66
"NQMJ¾FS
0VUQVU"
ELX112
or
ELX115
0VUQVU#
*OQVU"
*OQVU#
ELX118
ELX112
or
ELX115
ELX118
)[
low pass
filter (from
mixer or
processor)
Amplifier Load (per Output Channel)
# of Subwoofer/
Full-Range
Combinations
Nominal Minimum
1 6 Ohms 4.2 Ohms
2 3 Ohms 2.1 Ohms
Caution: Do not exceed
the maximum load rating of
the amplifier.
NL4 Pin Configuration
1JOTBOE Used
1JOTBOE /PU6TFE