Electro-Voice ELX200-10 - Recommended Configurations; Basic Stereo System

Recommended configurations
Basic stereo system using full-range systems
Basic stereo system using ELX200-10, ELX200-12 or ELX200-15 loudspeakers (ELX200-15
versions shown).
Input A
Input B
Mixer
Amplifier
Output 1
Output 2
ELX200-10,
ELX200-12,
or
ELX200-15
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 8 Ohms 7.2 Ohms
2 4 Ohms 3.6 Ohms
3 2.7 Ohms 2.4 Ohms
4 2 Ohms 1.8 Ohms
5
5.1
ELX200 Passive Loudspeakers
2017.10 | 01 | F.01U.326.890 Installation manual Electro-Voice