Electro-Voice ETX-18SP - Page 19

Figure 4.5: Multi-angle pole cup 0° (left) and multi-angle pole cup 7.5° (right)
Floor monitor
ETX-10P, ETX-12P, and ETX-15P loudspeakers may be used as a floor monitor by placing the
speaker on the integral monitor angle.
To set up a loudspeaker as a floor monitor, do the following:
1. Place the loudspeaker on a level stable surface.
2. Safely route cables to prevent injury to performers, production crew, and audience
members.
Notice!
Secure cables with wire ties or tape whenever possible.
Front View
60º
OPTIMAL
COVERAGE
90º
OPTIMAL
COVERAGE
40º
MONITOR
ANGLE
Figure 4.6: Optimum coverage in monitor position
en 19
Electro-Voice User Manual 2016.04 | 05 | F.01U.276.083