Electro-Voice ETX-35P User Manual

Electro-Voice | ETX-35P
ETX-35P
▪ 2000 W amplifier and 136 dB peak SPL
▪ Single-knob DSP includes presets for multiple
configurations and top+sub combinations
(performance style, locations, and space)
▪ Loudspeaker system performance monitoring via
integrated LCD and front panel LED
▪ Features three high-sensitivity transducers, for high
output sound which is optimized for precise
coverage and low distortion
▪ Designed for floor, stacked, or a combo pole cup
(insert and threaded) for portable or permanent
installation (Eight (8) M10 threaded suspension
points)
ETX-35P from Electro-Voice is a high-power three-way
loudspeaker, it can be used in a variety of portable and
permanent applications.
The DSP (Digital Signal Processing) menus offer
extensive configurations, crossovers, selective voicing,
protection limiters, EQ modes, and a lockout mode
prevents casual changes to the system. Loudspeaker
system performance is optimized via an LCD screen.
The front LED indicates power or can be configured to
indicate limit.
ETX-35P features three (3) high-sensitivity
transducers, for high output sound which is optimized
for precise coverage and low distortion. ETX EV
designed and manufactured transducers include SMX
woofer technology using composite cone materials,
flux stabilizing rings, and thermal management. This
transducer yields lower distortion, smooth response
and high SPL. The high-efficiency DH3-B compression
driver has a convex diaphragm driving a coherent
phase device extending frequency response to 20 kHz.
EV’s FIR-Drive technology utilized the latest FIR (Finite
Impulse Response) filter technology to optimize
transducer linearity and advanced limiter algorithms
for independent peak and thermal transducer
protection. The enclosure is constructed out of
18-mm, 13-ply birch plywood finished with EVCoat.
ETX combines EV-engineered intelligent DSP,
high-powered amplifiers and high-efficiency
transducers to deliver that legendary EV sound and
performance.
Technical specifications
Frequency Response (-3 dB): 48 Hz – 20 kHz
1
Frequency Range (-10 dB): 38 Hz – 20 kHz
1
Maximum SPL: 136 dB peak
2
Coverage (H x V): 60° x 40°
Power Rating: 2000 W
LF Transducer: SMX2151 380 mm (15 in)
MB Transducer: EVS-6C 6.5-in mid-bass driver
HF Transducer: DH3-B 1.25-in titanium compression
driver
Crossover Frequency: 700 Hz, 2900 Hz
Connectors: (2) XLR/TRS combo jack and (1) XLR
link output

Electro-Voice ETX-35P Specifications

General

Speaker Type	Powered Loudspeaker
Crossover Frequency	1.8 kHz
Type	Powered
Amplifier Power	2000 W
Woofer Size	15-inch
Tweeter Size	1.5 in
Tweeter	1.5-inch titanium diaphragm compression driver
Connectors	XLR/TRS Combo, XLR Thru
Input Connectors	XLR/TRS combo jack
Output Connectors	XLR loop-through
Enclosure Material	Plywood

Summary

Technical Specifications

Frequency Response (-3 dB)

Speaker's frequency range measured at -3 dB points.

Frequency Range (-10 dB)

Speaker's broader frequency range measured at -10 dB points.

Maximum SPL

The highest sound pressure level the speaker can produce.

Coverage (H x V)

Horizontal and vertical sound dispersion angles of the speaker.

Power Rating

The maximum continuous power output capability of the amplifier.

LF Transducer

Details of the Low-Frequency driver, including size and model.

MB Transducer

Details of the Mid-Band driver, including size and model.

HF Transducer

Details of the High-Frequency driver, including size and type.

Crossover Frequency

Frequencies where audio signals are divided between speaker drivers.

Connectors

Input and output connection types for the loudspeaker.

System Overview

Frequency Response Graph

Visual representation of speaker frequency output across different modes.

Amplifier Panel Controls

Labeled controls on the loudspeaker's amplifier panel for operation.

Ordering Information

Product Variants

Available versions of the loudspeaker for different regions and power requirements.

Accessories

Optional add-ons and related products for the loudspeaker system.