Electro-Voice EVOLVE - Installation; Assembling the loudspeaker system

14 en | Installation EVOLVE Portable Column Loudspeaker
2019-08 | 01 | Installation manual Electro-Voice
4 Installation
Assembling the loudspeaker system
!
Caution!
Do not attempt to move this loudspeaker system when it is fully assembled.
You may damage the system or cause personal injury.
1. Assemble the pole by connecting the two sections together.
The pole has magnets (A) at each end. The pole can be inserted on either end.
A
A
2. Place the column array loudspeaker on top of the subwoofer pole.
3. The column array loudspeaker system set up is complete.
4. Place the subwoofer on a level and stable surface.
To assemble the loudspeaker system, do the following: