Electro-Voice EVOLVE - DSP control menu

18 en | Amplifier DSP EVOLVE Portable Column Loudspeaker
2019-08 | 01 | Installation manual Electro-Voice
LIMIT
LIMIT protects the loudspeaker from short-term peaks which can cause distortion. When
LIMIT is shown small on the screen, the limiter is active but keeps distortion under control.
The large LIMIT indicates the sound is negatively affected. Reducing the output volume
(MASTER VOL) is strongly recommended when the large limit indication is shown.
5.3 DSP control menu
MODE MUSIC (Default)
LIVE
SPEECH
CLUB
SUB LEVEL 0 dB (Default)
Mute, -80 dB to +10 dB
OUTPUT EQ 63 Hz 0 dB (Default)
-6 dB to +6 dB
100 Hz 0 dB (Default)
-6 dB to +6 dB
160 Hz 0 dB (Default)
-6 dB to +6 dB
250 Hz 0 dB (Default)
-6 dB to +6 dB
400 Hz 0 dB (Default)
-6 dB to +6 dB
630 Hz 0 dB (Default)
-6 dB to +6 dB
1 kHz 0 dB (Default)
-6 dB to +6 dB
1.6 kHz 0 dB (Default)
-6 dB to +6 dB
2.5 kHz 0 dB (Default)
-6 dB to +6 dB
4 kHz 0 dB (Default)
-6 dB to +6 dB
6.3 kHz 0 dB (Default)
-6 dB to +6 dB
FX1 Preset Bypass (Default)
EFFECTS 1-49
Output Bus 25% (Default)
[0%:1%:100%]
FX2 Preset Bypass (Default)