EVOLVE Portable Column Loudspeaker Amplifier DSP | en 23
Electro-Voice Installation manual 2019-08 | 01 |
Resetting the system
To reset the system to original factory settings, do the following:
1. From the DSP menu, select RESET.
The "RESET ALL SETTINGS?" validation message appears.
2. Select YES.
The system is reset to the original factory settings.
Notice!
The reset menu item is used to revert the loudspeaker to the original factory default settings.
All user settings will be deleted. The user customized settings in the STORE and RECALL
menus return to <EMPTY>.
INFO menu
The Information menu is used to display the product name and firmware version.
To Next Page
Loading...
