Electro-Voice PSX600 - Specifications.15

SPECIFICATIONS
Technical Specifications PSX600 Mixing desk in rated condition, Unity Gain ( MIC Gain 20 dB ), all faders position 0 dB, all pots in
mid position, Master fader + 6dB, amplifier rated output power into 8 ohms, one channel driven, unless otherwise specified.
Maximum Midband Output Power. 1 kHz. THD < 1%
into 4 ohms
into 8 ohms
Rated Output Power, 20 Hz ... 20 kHz, THD £ 0 . 2 %
into 4 ohms
into 8 ohms
Maximum Output Voltage of power amplifier, no load
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu
Power amplifier input to Speaker L/R output
DIM 30, power amplifier
IMD-SMPTE, power amplifier, 60Hz, 7 kHz
Frequency Response, -3dB ref. I kHz
Any input to any Mixer output
Any input to Speaker L/R output
Crosstalk. 1kHz
Fader and AUX-Send attenuation
Channel to channel
CMRR, MIC input, 1kHz
Input Seasitivity, all level controls in max. position
MIC input
LINE Input (Mono)
LINE Input (Stereo)
Power Amplifier Input
Maximum Level, mixing desk
MIC inputs
Line inputs
All other inputs
Record Send output
All other outputs
Input Impedances
MIC
2 Track Return
All other inputs
Output Impedances
Record Send
Phones
All other outputs
2 x 340 W
2 x 200 W
2 x 300 W
2 x 150 W
43 Vitos
< 0.006%
< 0.08%
<0.03%
< 0 . 2 %
15Hz... 60kHz
30Hz... 40kHz
> 80 dB
> 70 dB
> 80 dB
-74 dBu (155 pV)
-54 dBu (1.55 mV)
-34 dBu (15.5 mV)
+6 dBu (1.55 V)
+11dBu
+ 30 dBu
+ 20 dBu
+ 14 dBu
+ 20 dBu
1.8 kO
10 kO
> 15 kQ
1 kO
47 0
75 0
Equivalent Input Noise, MIC Input, A-weighted, 150 O
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down
Master fader 0 dB, Channel fader down
Master fader 0 dB, Channel fader 0 dB, Channel gain unity
Signal/Noise-Ratio, power amplifier, A-weighted
Equalization
LO Shelving
MID Peaking
HI Shelving
Master EQ, 2x7-band, Stereo
Phantom Power, all MIC inputs
Power Requirements, 50Hz....60Hz
Power Consumption at 1/8 maximum output power, 4 O
Dimensions. (WxHxD), mm
Weight, including lid
Optional
Rack-Mount-Kit PM600. (NRS90239)
Wall-Mount-Kit PM600. (NRS90242)
Footswitch FS11
-130 dBu
JB.
-89 dBu
-83 dBu
105 dB
± 15 dB /60 Hz
± 12 dB / 2.4 kHz
± 15 dB / 12 kHz
± 10 dB
+24 Vdc
120V
450 W
455,5 x 175,8x340.6
13 kg
112 741
112 742
110 693
15