Electro-Voice ZLX-12P Quick Start Guide

Electro-Voice ZLX Series Quick Start Guide
Part Number: F01U280690 Rev. 01
Step Illustration
1. Connect the AC power cord from a grounded line
receptacle to MAINS IN.
2. Switch POWER to ON.
3. All input channels should be turned to the left before
connecting any jack.
4. Connect the 3.5 mm mini jack, XLR or TRS cable from an
audio source to AUX IN (A), INPUT 1 (B) or INPUT2.
A
Quick Start Guide for ZLX-12P and ZLX-15P Loudspeakers
A. ZLX-12P unit, 12” Two-Way Powered Loudspeaker
OR
ZLX-15P unit, 15” Two-Way Powered Loudspeaker
B. ZLX Series Loudspeaker Owner’s Manual
C. Power Cord
Instructions
A CB
Packing List
A
B

Electro-Voice ZLX-12P Specifications

General

Product color	Black
Volume control	Rotary
Housing material	Polypropylene (PP)
Recommended usage	Studio
Suitable for outdoor use	Yes
Speaker type	2-way
Number of drivers	2
Speaker placement	Floor
Audio output channels	1.0 channels
Woofer diameter (imperial)	12 \
Tweeter diameter (imperial)	1.5 \
Amplifier class	D
Impedance	- Ω
Frequency range	50 - 20000 Hz
RMS rated power	- W
Display	LSD
Maximum power	1000 W
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	1
AC input voltage	100 - 240 V
Power source type	AC
Package weight	19000 g

Weight and Dimensions

Width	356 mm
Height	610 mm
Weight	15600 g