EasyManua.ls Logo

Electro-Voice ZLX-15P - Passive Loudspeakers; Basic Stereo System Using Full-Range Systems

Electro-Voice ZLX-15P
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZLX Portable Loudspeaker Series Recommended configuration | en 31
Electro-Voice Installation manual 2019-05 | 03 | F.01U.319.253
5.2 Passive loudspeakers
5.2.1 Basic stereo system using full-range systems
Basic stereo system using ZLX-12 or ZLX-15 systems (ZLX-15 versions shown).
Mixer
Q99
Amplifier
Input A
Input B
Output A
Output B
45 Hz
high pass
filter (from
mixer or
processor)
ZLX-12
or
-15ZLX
ZLX-12
or
-15ZLX
NL4 Pin Configuration
Pin 1+ and 1- Used
Pin 2+ and 2- Not used
!
Caution!
Do not exceed the maximum load rating of the amplifier.
Amplifier Load (per Output Channel)
# of Speakers Nominal Minimum
1 8 Ohms 7.2 Ohms
2 4 Ohms 3.6 Ohms
3 2.7 Ohms 2.4 Ohms
4 2 Ohms 1.8 Ohms

Other manuals for Electro-Voice ZLX-15P

Related product manuals