Electro-Voice ZxA1 Series Owner’s Manual
5
System Features
ZxA1– 8” Two-Way Powered Loudspeaker
The ZxA1 is a compact, powerful and versatile choice for sound
reinforcement and stage monitoring applications — lightweight
and durable, with a 800 W amp.
• Lightweight and Durable ABS Enclosure
• Two-way loudspeaker with EV8L 8” Woofer
and DH2005 Titanium Compression Driver
• Rotatable High Frequency Waveguide
with Two Coverage Patterns
• Class D Lightweight Amplifier
• Bi-Amplified Design with 24dB/Octave Filter
Slopes and Transducer Protection
• Selectable 100Hz High Pass Filter for
use with an External Subwoofer
• XLR/TRS Combo Line Input
• XLR Microphone Input with Gain Control
• XLR Summed Output
• LED Indicators for Power On and Limit
• Pole Mount
• 45° Monitor Angle
ZxA1-Sub – 12” Powered Subwoofer
Optimized for performance with the ZxA1-Sub adds a deep,
low-frequency, amplified punch that you can hear and feel.
• 15mm Plywood Enclosure, Internally
Braced, with Textured Paint
• EVS-12S 305 mm (12”) Woofer for
Powerful, Engaging Bass Response
• Class D Lightweight Amplifier
• Pole Mount for Full-Range Systems
• Dual XLR Inputs and Outputs
• Switchable EQ Modes for Different Applications
• LED indicators for Power On and Limit
Model ZxA1-90/100 ZxA1-Sub
Freq. Response (-3dB):
60Hz–20kHz
1
53Hz–93Hz
2
Freq. Range (-10dB):
48Hz–20kHz
1
44Hz–118Hz
2
Max. Measured SPL:
126dB
1, 3
126dB
2, 3
Coverage (Horiz. x Vert.): 90° x 50° (ZxA1-90) 100° x 100° (ZxA1-100) Omnidirectional
Power Rating: 800W 700W
LF Transducer: (1) EV-8L, 204mm (8”) Woofer (1) EVS-12S, 305mm (12”) Woofer
HF Transducer: DH-2005, 25mm (1”) Exit Compression Driver N/A
Crossover Frequency: 1.8kHz 100Hz
Connectors: (1) XLR Mic Input with Gain Control, (1) XLR/TRS Combo Jack,
(1) XLR Link Output
(2) XLR Stereo Input, (2) XLR Stereo
Output
Enclosure Material: ABS 9-ply, 15mm Plywood, Internally Braced,
with Textured Paint
Grille: 18GA Steel with Black Powdercoat 16GA Steel with Black Powdercoat
Mains Requirements:
100V: 80V–110V, 0.7A
4
, 50-60Hz
120V: 95V–132V, 0.6A
4
, 50-60Hz
230V: 190V–264V, 0.4A
4
, 50-60Hz
120V: 90V–132V, 1.0A
4
, 50-60Hz
230V: 190V–264V, 0.6A
4
, 50-60Hz
Dimensions (H x W x D): 457mm x 282mm x 264mm
(17.99” x 11.10” x 10.39”)
400mm x 444.5mm x 457.2mm
(15.75” x 17.50” x 18.00”)
Net Weight: 8.6kg (19.0lbs) 20.9kg (46.0lbs)
Shipping Weight: 10.3kg (22.7lbs) 26.5kg (56.5lbs)
1. Full-Space
2. Half-Space
3. Typical maximum SPL value at one meter over the usable frequency range, measured with a pink-noise burst signal, using internal signal processing and amplifier driven to peak output.
4. 1/8 power
Specifications
To Next Page
Loading...
