103
2. Mark and disconnect the wire from the switch.
3. Remove the two screws holding the switch to the
control mounting panel and pull the switch
backwards.
Oven selector switch: (models with oven
thermostats)
1. Disconnect power and roll the control mounting panel
forward.
2. Mark and disconnect the wire from the switch.
Back of switch
3. Remove the two screws holding the switch to the
control mounting panel and pull the switch
backwards.
Two screws
Oven thermostats:
1. Disconnect power and roll the control mounting
panel forward.
2. Mark and disconnect the wire from the thermostat.
remove the two screws holding the brackets to the
control mounting panel. Pull the timer or control
forward then mark and disconnect the wires.
Two brackets and screws
Removing electronic oven control:
1. Disconnect power and roll the control mounting
panel forward.
2. Mark and disconnect the wires to the control.
3. Remove the four screws holding the electronic oven
control to the control panel (one in each corner).
Back view of electronic oven control
Top element switches:
1. Disconnect power and roll the control mounting
panel forward.
Two screws