Page 43
The lower oven chassis can be removed as an
entire assembly. Begin by disconnecting the wire
harness connections to the element and cavity
light.
Remove the drawer per instructions on page 41.
Using a ¼” nut driver with magnetic screw holder
remove the two screws securing the lower oven
chassis to the range chassis. These screws are
accessed through the holes in the lower oven
cavity liner just below the drawer glide rail. (Photo
A).
Photo A
Screw Access
Photo B
Lower Oven
Chassis
Assembly
The lower oven chassis can now be pulled forward
and removed from the range. (Photo B).
With the lower oven chassis removed the
insulation and chassis panels can be serviced.
NOTE: The lower oven chassis is not available as a
complete replacement assembly.
To Next Page
Loading...
