7. Replace the milk container lid.
Cleaning the coee jug
Clean the jug with a damp cloth and mild washing up liquid.
N.B.: To avoid damaging the appearance of the jug, do
not wash in a dishwasher.
CHANGING AND SETTING MENU
PARAMETERS
When the appliance is ready, you can use the internal menu to
modify the following parameters and functions:
Setting the language
To change the language on the display, proceed as follows:
-
icons (B7) and (B8) until the required lan-
guage is displayed.
(B6) icon (B6) to exit the menu.
N.B.: If you choose the wrong language, you can access
the menu directly to modify the parameter.
(B2) for at least 7 seconds until the applian-
ce displays the various languages.
Rinsing
This function enables you to obtain hotter coee.
Proceed as follows:
small cup of coee (less than 60 cc), preheat the cup by
rinsing it with hot water.
since the last coee was made, before requesting another
coee, you must preheat the brewing unit by rst pressing
the icon (B2) to enter the menu then the
the OK icon (B9).
Press the OK icon (B9) again.
Deliver the water into the underlying drip tray or alterna-
tively use this water to ll (and then empty) the cup to be
used for the coee to preheat it.
Changing the length of time the appliance
remains on
The appliance is set by default to go o automatically 30 minutes
after the last coee has been made.
To change this interval (max. 120 min), proceed as follows:
icon (B2) to enter the menu and then the
-
yed.
icons (B7) and (B8) to set the time after
which the appliance will go o (after 1/2 hour, 1 hour, 2
hours).
icon (B6) to exit.
Setting the clock
icon (B2) to enter the menu and then the
icons (B7) and (B8) until “SET CLOCK” is displayed.
icons (B7) and (B8) to set the hour, then
press the OK icon (B9) to conrm.
icons (B7) and (B8) to set the minutes, then
press the OK icon (B9) to conrm.
(B6) icon (B6) to exit the menu.
Setting auto-start time
This function programmes the time the machine will come on
automatically.
To Next Page
Loading...
