Electrolux EDW 503 - Regeneration Process; Softener Settings

- 19 -
Spares Operation - R.Kurzke 11/06 599 528 133 EN
12. Regeneration
The water chamber for regeneration contains 350 ml water. During regeneration, the regeneration
valve is energized. The 350 ml water runs into the salt container and mixes with the salt to form a
brine solution.
In the top of the salt container there is an opening with a small filter, from here the brine solution
enters the softener where the resins are regenerated.
The softener has 5 settings and can be adjusted to suit the degree of water hardness.