Electrolux EDW 503 - Housing Removal Procedure; Internal Component Locations (Left Side); Internal Component Locations (Right Side)

- 27 -
Spares Operation - R.Kurzke 11/06 599 528 133 EN
Housing
After removing the housing screws (lay the machine on its side) from the bottom of the
machine, the housing is unclipped front and back from the catches and can be removed.
All components from the left and right side are now accessible.
You need
screwdriver
Torx TX20
Electronic EDW 503
Thermostats
Rinse-aid dispenser
Interference filter
Coil for
detergent dispenser
Pressure switch
Drain pump
anti-siphon valve
Softener
Air chamber