- 37 -
Spares Operation - R.Kurzke 11/06 599 528 133 EN
Softener
1 To dismount the water
softener, these attachment
screws are removed.
2 The connections on the reed
switch are removed.
3 The hose connections are
detached.
4 The large nut of the salt hol
der must be released .
5 A spanner is useful in
removing the recycling inlet
nut.
6 Now the complete unit can be
removed.
Regeneration valve
After undoing the screws of the
recycling valve, this can be
removed.
1
2
4
3
5
6
To Next Page
Loading...