Step 2 Fill the water drawer with fresh water.
Step 3 Select the function from the menu: Cleaning. The user interface will guide you
through the procedure.
The function duration: around 30 minutes. When this function works, the light is
off.
Step 4 Remove the baking tray, when the function ends.
11.9 How to use: Drying reminder
After steam cooking the display shows a message prompting to dry the oven.
Press YES to dry the oven.
11.10 How to use: Drying
After steam cooking or steam cleaning you can dry the cavity with this function.
Step 1 Make sure the oven is cold.
Step 2 Remove all accessories.
Step 3 Open the menu: Cleaning.
Step 4 Choose Drying.
Step 5 Follow the instructions on the screen.
11.11 How to remove and install: Door glasses
You can remove internal glass panels to clean it. The number of glass panels depends on
specific model.
The camera module is located in the door handle. Be very careful not to damage the camera
cable connecting the door and the oven cavity. Clean the camera lens delicately with a soft
cloth.
Step 1 Open the door fully.
45/64
CARE AND CLEANING
To Next Page
Loading...
