electrolux 29
Fitting the shelf support rails
3 Important! The rounded ends of the
guide rails must be pointing forwards!
To re-insert, first hook the rail into place at
the back (1) and then insert the front and
press into place (2).
Oven Lighting
1 Warning: Risk of electric shock! Prior to
changing the oven light bulb:
– Switch off the oven!
– Disconnect from the electricity supply.
3 Place a cloth on the oven floor to protect
the oven light and glass cover.
Changing the oven light bulb/cleaning
the glass cover
1. Remove the glass cover by turning it
anti-clockwise and then clean it.
2. If necessary: replace with
25 watt, 230 V, 300 °C heat-resistant
oven lighting.
3. Refit the glass cover.
Changing side oven light/Cleaning glass
cover
1. Remove the left shelf support rail.
2. Remove the glass cover with the aid of
a narrow, blunt implement (e.g., tea-
spoon) and clean it.
3. If necessary:
replace bulb with a 25 watt, 230 V,
300 °C heat-resistant, oven light bulb.
To Next Page
Loading...
