30 electrolux
4. Refit the glass cover.
5. Insert the shelf support rail.
Oven Ceiling
The upper heating element can be folded
down to make it easier to clean the oven ceil-
ing.
Folding down the heating element
1 Warning: Only fold down the heating el-
ement when the oven is switched off
and there is no risk of being burnt!
1. Remove the side shelf support rails.
2. Grip the heating element at the front and
pull it forwards and out over the support
lug on the inner wall of the oven.
3. The heating element will now fold down.
1 Caution: Do not use force to press the
heating element down! The heating ele-
ment might break.
Repositioning the heating element
1. Move the heating element back up to-
wards the oven ceiling.
2. Pull the heating element forwards
against the spring pressure and guide it
over the oven support lug.
3. Settle it onto the support.
4. Insert shelf support rail.
1 Important: The heating element must
be positioned correctly and securely on
both sides above the support lug on the
inner wall of the oven.
Cleaning the oven ceiling
To Next Page
Loading...
