Electrolux EUROFLEC - Main differences between the EUROCOMBI and the EUROFLEC model

EUROFLEC 35/36
10. Main differences between the EUROCOMBI and the EUROFLEC model
For further information about EUROCOMBI model refer to Service Manual 599340461.
Please find below a summary of the main differences between the EUROCOMBI model (writings in italics)
and the EUROFLEC model (with normal writings).
♦ Energy class
EUROCOMBI : B , C ;
EUROFLEC : B ;
♦ Climate class
EUROCOMBI : T , N ;
EUROFLEC : SN , N , T ;
♦ Power supply of fans
EUROCOMBI : 21 V DC ;
EUROFLEC : 18 V DC ;
♦ Display board
EUROCOMBI : abbrev. CTB (control board) ; has the function to control and display ;
EUROFLEC : abbrev. UIB (user interface board) ; has only the function to display, since the
microprocessor and the buzzer have been displaced in the power board MB ;
♦ Power board
EUROCOMBI : abbrev. PWB (power board) ;
EUROFLEC : abbrev. MB (main board) ; has the function to control by means of a microprocessor; the
buzzer for alarms is present; it has a 18 V DC power supply unit in place of the 21 V DC transformer;
♦ Evaporator and condenser fans
EUROCOMBI : operation in parallel ;
EUROFLEC : independent operation ;
♦ Connections for NTC sensors, evaporator fan, heating elements and freezer door switch
EUROCOMBI : the connectors are positioned in the connections box ;
EUROFLEC : the connectors are independent and are connected to the foamed connectors in the
cabinet;
♦ Defrosting
EUROCOMBI : regulated by the “adaptivity” ;
EUROFLEC : regulated by the “adaptivity” with the “forced defrosting” supplementary function when the
NTC sensor of the evaporator detects a temperature lower than –35°C ;
♦ STANB-BY position of the refrigerator thermostat knob
EUROCOMBI : in this position the flap closes completely the air flow ;
EUROFLEC : in this position the flap does NOT close completely the air flow but regulates the
refrigerator temperature around +15°C ;