Rack positions
Installing Oven Rack Supports
ALWAYS INSTALL OVEN RACK
SUPPORT BEFORE TURNING ON
THE OVEN (WHEN THE OVEN IS
COOL).
,
insert the supports by pushing them
downward into the two brackets on
each side of the oven interior, as
shown below.
for a self-clean cycle, pull up the
support to disengage them from the
brackets. If the rack supports are not
removed, the self-clean cycle won’t
start.
Oven Vent Location
The oven is vented When
the oven is on, warm air is released through
the vents. This venting is necessary for
proper air circulation in the oven and good
baking results.
Oven Rack Positions
This oven is equipped with ladder rack supports with
7 positions to accomodate precisely every mode of
cooking.
(NON-SLIDING
RACK ONLY)
OVEN RACK SUPPORTS & OVEN VENTS
To Next Page
Loading...
