7.11 Clean Me Program
1
Press the Power button.
• The LED shows only ‘- --’ signal.
2
select the ‘CLEAN ME’ program using the program
selection dial.
• If you press ‘Start/Pause’ button aftrer pressing Power button
without selecting program, the ‘Cotton’ program is selected as
default program.
• ‘Cold’ water temperature and ‘soak’ washing course and ‘2’
times rinse and ‘Low’ spin speed are and ‘Low’ dry selected
automatically.
3
Press the ‘Start/Pause’ button.
• The washer will be operated with locking Door and supplying
water.
NOTE
• All programs are not selectable except rinse time(s).
• DELAY is not selected.
• Use this program WITHOUT load.
• The appropriate cleaning time is one time per a month.
7. WAsHInG PRoGRAM AnD seLeCtIon (CONT’D)
To Next Page
Loading...
