Electrolux EWW1122DW - Inlet Hose Connection; For Screw-Shaped Tap

12
www.electrolux.com
4. InLet Hose ConneCtIon
The washer should be connected to the water mains using new hose sets and old hose
sets should not be reused. In using only one water tap or in case of only one water inlet
valve, connect the inlet hose to the cold water inlet valve.
Option : Be careful not to confuse hot water inlet and cold water inlet
1. Connect the inlet hose to
the water tap by screwing the
connector tightly.
2. Connect the connectorinlet
supplied if necessary.
3. Connect the inlet hose
adapter to the water inlet of a
washer and turn it to be xed.
4.1 For Screw-Shaped Tap
Hose
Hose
Connector
Connector
Connector
Connector
Connector
Inlet
Rubber
Packing
Rubber
Packing
* Check the
packing
in the inlet.