Electrolux N7E - User Manual

Questions and Answers

H
heather60Aug 12, 2025
What to do if the pilot light is on but the main burner won't light on my Electrolux Fryer?
- J
  Jessica JonesAug 12, 2025
  If the pilot burner is lit, but the main burner on your Electrolux Fryer does not ignite, there could be several reasons: * There might be insufficient pressure in the gas pipe. Try following the lighting procedure, making sure to press the ignition knob. * The nozzle could be blocked. In this case, you should call service. * There may be a faulty gas valve. You should call service. * The thermostat operation may be faulty, which also requires calling service.
L
Lisa LesterAug 19, 2025
Why is there a problem with the temperature setting on my Electrolux Fryer?
- J
  Jason WardAug 19, 2025
  A problem with the temperature setting on your Electrolux Fryer can stem from a few potential issues: * The oil may have deteriorated. If this is the case, replace the oil. * The tank may be poorly cleaned, especially around the bulb. Ensure the tank is cleaned thoroughly. * The thermostat bulb might be damaged, or the thermostat itself could be faulty, both of which require calling service.
R
Ryan DavisAug 27, 2025
Why won't the main burner light on my Electrolux Commercial Food Equipment if the pilot is lit?
- A
  Ashlee GarrettAug 27, 2025
  If the pilot burner is lit but the main burner on your Electrolux Commercial Food Equipment won't light, here's what might be happening: * There could be a loss of pressure in the gas supply pipe. * The nozzle might be blocked, or the gas valve could be faulty. * The burner's gas outlet holes might be clogged.
C
colleenthomasSep 2, 2025
How to troubleshoot a pilot burner that won't light on Electrolux Commercial Food Equipment?
- B
  Bruce WalshSep 2, 2025
  If the pilot burner on your Electrolux Commercial Food Equipment isn't lighting, check the following: * Ensure the igniter is properly fixed and connected. * Inspect the ignition or igniter cable for damage. * Verify sufficient pressure in the gas pipes. * Check for a blocked nozzle. * Consider a faulty gas valve.