11
A.12 Machine cleaning and maintenance
• Before carrying out any cleaning or maintenance, disconnect the appliance from the
power supply and carefully unplug it (if present).
• During maintenance, the cable and plug must be kept in a visible position by the
operator carrying out the work.
• Do not touch the appliance with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Use a ladder with suitable protection for work on appliances with high accessibility
(depending on the appliance type).
• Use suitable personal protection equipment (protective gloves). Refer to “A.2 Personal
protection equipment“ for suitable personal protection equipment.
Ordinary maintenance
• Disconnect the power supply before cleaning the appliance.
• Do not clean the machine with jets of water.
Precaution in case of long periods
• Machine maintenance, checking and overhaul operations must only be carried out by
specialised personnel or the Customer Care Service, provided with adequate personal
protection equipment (safety shoes and gloves), tools and ancillary means.
• Work on the electrical equipment must only be carried out by a specialised electrician or
the Customer Care Service
• Put the machine in safe conditions before starting any maintenance operation.
• Respect the requirements for the various routine and extraordinary maintenance
operations. Non-compliance with the instructions can create risks for personnel.
Preventive maintenance
• Preventive Maintenance reduces downtime and maximizes machines efficiency.
Customer Care Service can provide advice on the best maintenance plan to be
purchased based on the intensity of use and the age of the equipment.
Repair and extraordinary maintenance
• Repair and extraordinary Maintenance have to be carried out by specialised authorised
personnel. The manufacturer declines any liability for any failure or damage caused by
the intervention of an unauthorised technician by the Manufacturer and the original
manufacturer warranty will be invalidated.
Parts and accessories
• Use only original accessories and/or spare parts. Failure to use original accessories
and/or spare parts will invalidate the original manufacturer warranty and may render the
machine not compliant with the safety standard.
A.13 Machine disposal
• Dismantling operations must be carried out by specialised personnel.
• Work on the electrical equipment must only be carried out by specialised personnel, with
the power supply disconnected.
• Make the appliance unusable by removing the power cable and any compartment
closing devices, to prevent the possibility of someone becoming trapped inside.
To Next Page
Loading...
