12
B TECHNICAL DATA
B.1 Dataplate position
IMPORTANT
This instruction manual contains information relevant to various appliances. See the dataplate located under the control
panel to identify the appliance (see picture below).
IMPORTANT
When installing the appliance, make sure the electrical connection is carried out in compliance with that specified on the
dataplate.
B.2 Appliance and manufacturer's identification data
An example of the marking or dataplate on the machine is given below:
GAS appliances ELECTRICAL appliances
The dataplate gives the product identification and technical data. The meaning of the various information given on it is listed below:
F.Mod. factory description of product
Comm.Model commercial description
PNC production number code
Ser.No. serial number
Type family type
El power supply voltage + phase
Hz power supply frequency
kW max. power input
A current absorbed
Power unit El.
power
I dust and water protection rating
CE CE marking
AB gas safety certificate number
N certification group
0051 notified body
EN 203–1 EU standard
L logo IMQ/GS
Cat
gas category
To Next Page
Loading...
