487 05 40 31
12.3
12. Error codes
12
Service
manual
General
The dryer is equipped with an automatic diagnostic system.
Operating problems are displayed as blinking error codes. Whenever an
error occurs, the dryer stops operating.
Except where noted, error codes are cleared by disconnecting the
power or by entering the service program.
Error analysis
A diagnostic procedure is provided for each error code. If an error has
not been corrected after the procedure, please contact the manufacturer
for additional assistance.
Explanation to error analyses
Replace the PCB.
(Section 21)
A reference to a section in the
service manual to the dryer in
question.
Troubleshooting
To Next Page
Loading...
