Electrolux TE1120 - Care and Cleaning; Cleaning the Filter

18
User manual
12Care and cleaning
12.1 Cleaning the filter
At the end of each cycle the symbol Filter appears on the display indicating that you must clean the filter.
If the symbol
Filter flashes on the display it indicates that the filter is missing. The tumble dryer cannot start.
The filter collects the lint during the drying cycle.
To achieve the best drying performances clean the filter regularly, clogged filter lead to longer cycles and energy con-
sumption increase. Use your hand to clean the filter and if necessary, a vacuum cleaner.
Caution
Avoid the use of water to clean the filter. Instead throw away lint in the dustbin ( avoid dispersion of plastic fiber in
water ambient).
To clean the filter:
1. Open the door. Pull the filter up.
fig.X02224
2. Push the button.
fig.X02225
3. Open the filter.
fig.X02226
4. Gather lint with your hand from the internal parts of the filter.