Installation manual
65
• Check the direction of rotation of motion motor fan . (see arrow stuck on the fan)
Switch off the current and shift two phases on the main switch of the machine if the fan rotates in the wrong
direction.
• Check that the inner drum is empty.
• Open the manual valves controlling the water and steam supplies (for steam heating machines).
• Operate the machine manually to fill with cold water, then hot water. Check that these water supplies are con-
nected as they should be.
• Start the machine on wash action, and check that the motor is revolving alternately in the both ways, as normal for
wash action.
• Start heating by programming a final temperature. Check that the steam valve opens or the heating element relay
reacts, as appropriate.
• Check that the detergents container is working as they should.
• Check the water and steam connections and the drain valve for signs of any leakages.
• Empty the water from the machine and open its door.
Automatic operation
• Check that the external switch or switches are switched on and that the manual valves for water and steam (if the
machine has steam heating) are open.
• Run one of the machine's built-in (standard) with heating.
• Check that the program proceeds normally, and the water filling, detergent filling, heating and motor action are all
working in accordance with the program display on the display screen.
Final checking
If all function checks have been satisfactory, reassemble all protection casings.
To Next Page
Loading...
