8
Installation manual
IMPORTANT
The identification plate is located on the right side near the main switch.
Never use the main switch as an emergency stop. Use it only when the machine does
not work in progress. Instead of that, use the emergency stop buttons in both sides of
the machine.
IMPORTANT
Sound pressure level is found in Technical data.
CAUTION
Your machine is equipped with an automatic weighing system which weighs the laun-
dry during the loading and unloading cycle. For proper operation of this system, you
should not open the tank doors for the all duration of the wash program initiated
even if errors occurs.
IMPORTANT
Never try to open the outer drum door before the complete stop of the cage.
CAUTION
Disconnect all the sources of energy before any intervention on the machine.
To Next Page
Loading...
