0107 22
11
Notice
Date
Page
01201138
INSTRUCTION
HANDBOOK
Press SELECT.
Motor on after wash
Motor to rotate after program has ended
If you answer Yes (Y) :
The motor will continue to rotate in alternative direc-
tions after the program has ended. This prevents creas-
ing of the load.
When the program has ended, the display will look like
this :
To access this function, see
instructions in section « Manual
operation ».
A toggle function :
Use Y/N to toggle the function
from Y (Yes) to N (No).
Press STOP to stop the motor.
When you have fi nished :
Press
to highlight « EXIT ».
11. Machine
operation
991 NORMAL 95 °C STD
SELECT
MANUAL FUNCTIONS
Y/N
MOTOR
MOTOR ON AFTER WASH N
EXIT
Y/N
MOTOR ON AFTER WASH
EXIT
MOTOR ON IN
MANUAL FUNCTIONS
STOP
To Next Page
Loading...
