Electronics Line iconnect - PIR Detectors (EL-4745;EL-4745 PI)

Appendix B: Transmitter Installation
iConnect
Installation Manual
84
1
0
m
70°
2
.
4
m
1.85m
1
0
m
70°
2
m
1.55m
Figure B- 5: Lens Coverage – EL-4755 Figure B- 6: Lens Coverage – EL-4755PI
Figure B- 7: Camera Lens Coverage (Top View)
–
EL-4755/EL-4755PI
Figure B- 8: Camera Lens Coverage (Side View)
–
EL-4755
Figure B- 9: Camera Lens Coverage (Side View)
–
EL-
4755PI
EL-4755/4755PI complies with EN-50131 2-2 Grade 2 Class II Power Supply Type C.
PIR Detectors (EL-4745/EL-4745PI)
The EL-4745 and EL-4745PI are intelligent 2-Way wireless PIR detectors designed for use with the iConnect Control
System. All of these detectors implement a feature to combat the problem of multiple transmissions, which drastically
reduce the life of the batteries. After each transmission, there is a four-minute delay during which further transmissions
will not be sent. When batteries need replacing, the detector sends a low battery indication to the Control System.
Detectors that meet the EN-50131 standard, have a three-minute delay between transmissions.
The EL-4745PI is designed for installations prone to nuisance alarms caused by pets or small animals.
P
C
B