To Next PageTo Next Page
Need help?Do you have a question about the Elegoo Mars 2 Pro and is the answer not in the manual?
General| Layer Thickness | 0.01 - 0.2mm |
|---|---|
| Connectivity | USB |
| Power Requirements | 100-240V, 50/60Hz |
| Power Consumption | 60W |
| Slicer Software | ChiTuBox |
| Technology | MSLA (Masked Stereolithography) |
| Build Volume | 129 x 80 x 160 mm |
| XY Resolution | 0.05 mm |
| LCD Screen | 2K Monochrome LCD |
| Light Source | 405nm UV LED |
| Print Speed | 30-50mm/h |
| Weight | 6.2 kg |
| Operating System Compatibility | Windows, macOS |
Instructions for the initial printing process, including resin addition and model selection for the first print.
Steps for installing the ELEGOO ChiTu Box software from the provided U Disk or official website.
Guide to operating ChiTu Box, including opening 3D model files and basic manipulation.
Setting up the printer profile and understanding build volume limitations within ChiTu Box.
Detailed explanation of resin parameters and print settings like layer height and exposure time.
Process for slicing models and exporting the sliced files to a U Disk for printing.
