To Next PageTo Next Page
Need help?Do you have a question about the Elegoo Mars 2 and is the answer not in the manual?
General| Layer Resolution | 0.01-0.2mm |
|---|---|
| Z Axis Accuracy | 0.00125mm |
| Wavelength | 405nm |
| Print Speed | 30-50mm/h |
| LCD Screen | 6.08-inch 2K Monochrome LCD |
| Display | 3.5-inch Touchscreen |
| Slicer Software | ChiTuBox |
| Connectivity | USB |
| Material Compatibility | 405nm UV Resin |
| Technology | MSLA (LCD-based) |
| Light Source | UV Integrated Light (wavelength 405nm) |
| Build Volume | 129mm(L) x 80mm(W) x 150mm(H) |
Key safety instructions, handling, and environmental advice for printer operation and children's safety.
Step-by-step guide to loading resin, selecting models, and starting the first print.
Instructions for post-print model washing and cleaning the resin tank after printing.
Steps for installing and performing basic operations in the ChiTu Box slicing software.
Setting up essential parameters like layer height, exposure times, and build volume for slicing.
Finalizing the slicing process and exporting the model file to a USB drive for printing.
Solutions for models not sticking to the build platform or experiencing layer breakage.
Troubleshooting common printer errors, failures, and causes of incomplete prints.
Procedures for Z-axis lubrication, cleaning components, resin handling, and general maintenance.
