Need help?Do you have a question about the Elegoo Mars Series and is the answer not in the manual?
General| Light Source | UV LED |
|---|---|
| Wavelength | 405nm |
| Connectivity | USB |
| Materials | 405nm UV Resin |
| Layer Thickness | 0.01-0.2mm |
| Build Volume | Varies by model |
| XY Resolution | Varies by model |
| Software | CHITUBOX |
| File Formats | .stl |
| Resolution | Varies by model |
| Print Speed | Varies by model |
| Power Consumption | Varies by model |
| Machine Dimensions | Varies by model |
| Machine Weight | Varies by model |
| Layer Resolution | 0.01 - 0.2 mm |
Procedure to test the printer's UV lights by checking the LCD screen display for the ELEGOO TECHNOLOGY logo.
Configuration options for ChiTu Box software, including machine selection and build volume settings.
Setting the build volume parameters within ChiTu Box for accurate 3D model slicing.
Troubleshooting common problems like models not sticking to the build platform.
Identifying reasons for model layer breakage during printing, such as shaking or loose components.
Guidance for when the Mars 2 Pro printer fails, including warranty and support contact.
Addressing incomplete prints and managing residual resin.
To Next Page