platform and tank, you can clean and wipe them up using tissues.
5.Maintenance
1. If Z axis keeps making friction noises, please add some lubricant to it.
2. Please do not use sharp or pointy objects to scrape the release liner film in case of damages.
3. Be careful when you remove the build platform in case you may smash the 2K Photocuring screen.
4. Remember to pour the rest of the resin in the tank back into the resin bottle and seal it well if you don’t use the
printer in the next 48 hours. And if there are any residues please use a filter to filter them out.
5. Please clean up the build platform and the printer using tissues or ethyl alcohol once you complete printing.
6. Please clean up the resin tank before changing another colors of resin.
To Next Page
Loading...
