Mars 2 Pro Printer Tech Specs
Printing Parameter
System: EL3D-3.0.2
Operation: 3.5 Inch Touch Screen
Slicer Software: CHITUBOX
Connectivity: USB
Printing Specification
Technology: LED Display Photocuring
Light Source: UV Integrated Light (wavelength 405nm)
XV Resolution: 0.05mm(1620*2560)
Z Axis Accuracy: 0.00125mm
Layer Thickness: 0.01-0.2mm
Printing Speed: 30-50mm/h
Power Requirements: 100-240V 50/60Hz
Hardware Specification
Dimensions: 7.87in (L)*7.87in (W)*16.14in (H), 20cm (L)*20cm (W)*41cm (H)
Build Volume: 5.08in(L)*3.15in(W)*6.30in(H) 12 .9cm(L)*8cm(W)*16cm(H)
Weight: 13.671bs(6.2kg)
To Next Page
Loading...
