22
TROUBLESHOOTING
If your TV does not operate normally or cannot be turned on, please check
the following troubleshooting questions. Remember also to check any other
connected electronic device, such as DVD or blu-ray player to pinpoint the
problem. If the TV still fails to operate normally, please contact technical support
SYMPTOM POSSIBLE CAUSE REMEDY
Dead. No LED lit No power to the TV.
TV's AC socket.
Dead. No LED lit red Set in standby mode.
or the Standby button on the
remote control.
Blue screen
No signal.
select the correct source.
Incorrect
source selected.
Noisy, snowy, ghosting
Poor antenna signal. adjusting the antenna position.
Check antenna connections.
No sound
External leads
not connected "if used".
are connected properly.
n
To Next Page
Loading...
