P220 Stationary Barcode Scanner User Manual 39
Check setting
MSI barcode can not to be contained in Code 11 barcode data. If there is a check bit that is the last 1
or 2 characters of the data. The check bit is a value calculated based on all data to check that if the
data is correct.
Setting whether to check
1-bit Check (Default) 2-bit Check
2-bit Check MOD10/MOD10 (Default) 2-bit Check MOD10/MOD11
Set whether to transmit the check-bit
Transmit No Transmit (Default)
To Next Page
Loading...
