41
3.1.19 Enable Alarms Sms
Setting and display screen.
Besides the alarm management “by status”, it is possible to have
alarm management “by event”.
The alarms for which this management mode is enabled merge in a buffer.
If the value “0” is attributed to the relative alarm, it means that is deactivated, while
the value
“1” means that is activated to be managed in “by event” mode.
This function is available only by means of connection on the Omron protocol.
In order to understand the meaning of the alarms, please refer to paragraph “Alarms/
events list”.
3.1.20 Display Alarms Bit
Setting and display screen.
Here is summarized the event configuration set in the menu “Enable Alarms SMS” (the
“Enable”) and those that are active are highlighted (“Status” field).
If the field “SMS / PSTN StatusReady” is “TRUE” means that an event is active, and has
been sent alarm or phone call.
To return the field “FALSE” you need to reset alarms.
Instructions for use
To Next Page
Loading...
Need help?
General
