44
3.1.24 GSM and modem service
Setting and display screen.
The GSM signal field intensity can be monitored.
It is possible to enable the submission of an alarm by SMS and/or PSTN in case of no
mains power (No Mains SMS) for the period of time set (Delay).
It is possible to enable the submission of an alarm by SMS and/or PSTN if the power
delivered is at least 3dB less than the target set (SMS FWD over 2/3).
The codes to be displayed in the different message strings can be defined (PagerId,
StatId, String Id).
3.1.25 Phone N.1 to N.8
Setting and display screen.
The equipment can “communicate” with up to 8 SIM cards.
The telephone numbers and authorizations can be defined in international format
The number can be globally enabled for SMS transmission and reception SMS (En.), be
enabled to send commands (Cmd), be enabled to request and receive the machine sta-
tus (Sts), be enabled to receive the echo any of commands sent by other numbers (Glb)
and be enabled to receive SMSs in text or digital format (PC.).
Instructions for use
To Next Page
Loading...
Need help?
General
