ELGA Purelab flex 3 - Page 17

PURELAB flex 3/4 Operators Manual ELGA
Page 16 PURELAB flex 3/4 MANU39265 Version 01 - 09/10
DIMENSIONS and WEIGHTS
Dimensions
Width 236mm, Depth 470mm, Height minimum 900mm,
Height maximum 1020mm.
Model
PURELAB flex 3
(
Ultra Pure Water (Type I)
Directly from tap water)
PURELAB flex 4
(
Ultra Pure Water (Type I) from
RO (Type III) feed water)
Operational weight
23 kg (57.3 lb)
23 kg (57.3 lb)
Installation
Bench / Wall
ELECTRICAL REQUIREMENTS
Mains input 100-240V ac, 50-60 Hz
System control voltage
(not including pumps and UV)
24 V dc
Power consumption (peak demand)
100 VA
PRODUCT WATER SPECIFICATION
Model
PURELAB flex 3
(
Ultra Pure Water (Type I)
directly from tap water)
PURELAB flex 4
(Ult
ra Pure Water (Type I) from
RO (Type III) feed water)
Volume of Ultra Pure (Type 1) Water
used per working day.
Up to 10 L/day
Ultra Pure delivery flow rate from
Dispense Handset
Up to 2 L/min
Inorganics (Resistivity @25°C) 18.2MΩ-cm
Organics (TOC) – typically <5ppb
1
Bacteria – Typical <1 CFU/ml (when fitted with POU filter)
Bacteria – Typical <1 CFU/10ml (when fitted with Biofilter)
Endotoxin <0.001 EU/ml (when fitted with Biofilter)
DNase <20 pg/ml (when fitted with Biofilter)
RNase 0.002 ng/ml (when fitted with Biofilter)
Particles 0.2µm filtration (when fitted with POU filter)
pH Effectively neutral
Reverse Osmosis (Type III) Make-
up flow rate
Up to 10 L/hr
Volume of Pure (Type III) Water
used per working day.
(Taken directly from the internal
reservoir)
<10 L/day
1
Dependent on feed water
As part of our policy of continual improvement we reserve the right to alter the
specifications given in this document.