- 14 -
6. Installation
6.1. Qualifications of the Staff
Improper maintenance
... can lead to serious personal injuries or property
damage.
Therefore:
Maintenance work should be referred to qualified
and authorized by the operator and instructed
personnel.
6.2 The Sensor
The sensor integrates the magneto resistance test bridges from which, addicted to the track, the counts for
the signal processing electronic are formed. The distance between the sensor and band within the range X
may not be larger than 1.0 mm. Each smaller value is permitted. The sensor cable has 6 cores and is highly
flexible. The cores are stranded in pairs and shielded. The sensor cable can be used in a dragline.
Installation
To Next Page
Loading...