To Next PageTo Next Page
Need help?Do you have a question about the ELICA EPR628S1 and is the answer not in the manual?
Always leave safety grills and filters in place for safe operation to prevent injury.
Provides detailed product dimensions for installation planning and cabinet fit.
Specifies minimum clearances required for safe and proper installation around cabinets.
Details the necessary steps and conditions for venting the range hood system to the outdoors.
Special considerations for cold weather installations to prevent issues like backward airflow.
Explains the need for makeup air systems based on ventilation capacity and local codes.
Describes factory venting setup and the recirculating option using a kit.
Crucial steps and warnings for properly grounding the range hood to prevent shock.
Steps for preparing the installation site, including vent system and power disconnection.
Details on how to cut the cabinet bottom for the range hood installation.
Instructions for cutting roof openings and installing the vent system for outdoor exhaust.
Instructions for cutting wall openings and installing vent system for outdoor exhaust.
Guide for installing the hood for recirculating air without external venting.
Steps for lifting and attaching the hood liner and centering the canopy in the cabinet.
Instructions for connecting lamp connectors and attaching the face plate to the hood.
Steps to connect the vent system to the range hood opening and seal with clamps.
Steps to connect the vent system, install charcoal filters, and seal with clamps.
Instructions to replace grease filters as part of the installation completion.
Verify the operation of the range hood fan and light after installation.
Details the location and function of blower and light controls on the hood.
Explains how to turn the hood lights on and off using the dedicated button.
Describes how to turn the blower on, control speed, and turn it off.
Guidelines for cleaning the cooker hood safely and effectively, avoiding abrasive products.
Instructions for washing and reinstalling metal grease filters for optimal performance.
Note that LED lamps are only replaceable by a service technician.
Information on the recirculating kit for non-vented installations, including charcoal filter usage.
Details on extension liner kits for complete protection of cabinets.
Owner must present proof of original purchase date to obtain service.
Covers free non-consumable parts and labor for manufacturing defects within two years.
Lists damages and failures not covered by the warranty, such as accidents or misuse.
Defines warranty coverage for the original purchaser for residential use in North America.
Provides contact information for warranty service and questions.
Always leave safety grills and filters in place for safe operation to prevent injury.
Provides detailed product dimensions for installation planning and cabinet fit.
Specifies minimum clearances required for safe and proper installation around cabinets.
Details the necessary steps and conditions for venting the range hood system to the outdoors.
Special considerations for cold weather installations to prevent issues like backward airflow.
Explains the need for makeup air systems based on ventilation capacity and local codes.
Describes factory venting setup and the recirculating option using a kit.
Crucial steps and warnings for properly grounding the range hood to prevent shock.
Steps for preparing the installation site, including vent system and power disconnection.
Details on how to cut the cabinet bottom for the range hood installation.
Instructions for cutting roof openings and installing the vent system for outdoor exhaust.
Instructions for cutting wall openings and installing vent system for outdoor exhaust.
Guide for installing the hood for recirculating air without external venting.
Steps for lifting and attaching the hood liner and centering the canopy in the cabinet.
Instructions for connecting lamp connectors and attaching the face plate to the hood.
Steps to connect the vent system to the range hood opening and seal with clamps.
Steps to connect the vent system, install charcoal filters, and seal with clamps.
Instructions to replace grease filters as part of the installation completion.
Verify the operation of the range hood fan and light after installation.
Details the location and function of blower and light controls on the hood.
Explains how to turn the hood lights on and off using the dedicated button.
Describes how to turn the blower on, control speed, and turn it off.
Guidelines for cleaning the cooker hood safely and effectively, avoiding abrasive products.
Instructions for washing and reinstalling metal grease filters for optimal performance.
Note that LED lamps are only replaceable by a service technician.
Information on the recirculating kit for non-vented installations, including charcoal filter usage.
Details on extension liner kits for complete protection of cabinets.
Owner must present proof of original purchase date to obtain service.
Covers free non-consumable parts and labor for manufacturing defects within two years.
Lists damages and failures not covered by the warranty, such as accidents or misuse.
Defines warranty coverage for the original purchaser for residential use in North America.
Provides contact information for warranty service and questions.
General| Style | standard hood |
|---|---|
| Color | stainless steel |
| Hood Type | under cabinet |
| Venting Type | convertible |
| Blower Type | internal |
| Number of Fan Speeds | 3 |
| CFM | 600 cfm |
| Duct Size | 6 inch |
| Filters | baffle |
| Sones | 6.8 |
| Control Type | stainless steel push buttons |
| Interior Light | led |
| Wi-Fi | no |
| Electrical Requirements | 120v-60hz, 455 w |
| Voltage | 120 volts |
| Current | 15 |
Weight and Dimensions| Depth | 10 3/4 inch |
|---|---|
| Height | 14 9/16 inch |
| Width | 28 1/4 inch |
