Elinchrom FIVE - Fitting Accessories

Fitting Accessories
• Always switch the unit off before attaching
accessories.
• Mount the ash unit to a tripod and lock the security
screw.
• Shift the locking knob (on the top of the unit) of the
reector bayonet to the OPEN position.
• Insert an accessory and turn it clockwise until you
hear it click into place.
• Shift the locking knob (on the top of the unit) of the
reector bayonet to the CLOSE position.
• Check if the Reector is correctly tted.
Please use only original Elinchrom accessories and
reectors. The warranty does not cover damage caused
by third party accessories and reectors.
14 — ELINCHROM FIVE User manual