Elkay LZWSR 1C Series User Manual (English)

To Next Page

Page 1 1000001734 (Rev. C - 11/14)

EZWSR*1C, *2C LZWSR*1C, *2C

EZWSRK -EZH2O RETRO-FIT BOTTLE FILLING UNIT

INSTALLATION, CARE & USE MANUAL

EZWSR / LZWSR Bottle Fillers are among the easiest to install on the market

today. To insure you install these models easily and correctly, PLEASE READ

THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION.

CHECK YOUR INSTALLATION FOR COMPLIANCE WITH PLUMBING,

ELECTRICAL, ANDOTHER APPLICABLE CODES. After installation, leave these

instructions with the Cooler for future reference.

IMPORTANT

THIS IS AN INDOOR APPLICATION ONLY.

ALL SERVICE TO BE PERFORMED BY AN

AUTHORIZED SERVICE PERSON.

IMPORTANT! INSTALLER PLEASE NOTE.

THE GROUNDING OF ELECTRICAL EQUIPMENT SUCH AS TELEPHONE, COMPUTERS, ETC. TO WATER

LINES IS A COMMON PROCEDURE. THIS GROUNDING MAY BE IN THE BUILDING OR MAY OCCUR AWAY

FROM THE BUILDING. THIS GROUNDING CAN CAUSE ELECTRICAL FEEDBACK INTO A FOUNTAIN, CREAT-

ING AN ELECTROLYSIS WHICH CAUSES A METALLIC TASTE OR AN INCREASE IN THE METAL CONTENT

OF THE WATER. THIS CONDITION IS AVOIDABLE BY USING THE PROPER MATERIALS AS INDICATED. ANY

DRAIN FITTINGS PROVIDED BY THE INSTALLER SHOULD BE MADE OF PLASTIC TO ELECTRICALLY ISO-

LATE THE FOUNTAIN FROM THE BUILDING PLUMBING SYSTEM. WE SUGGEST THAT THE BOTTLE FILLING

STATION AND WATER COOLER BE PROTECTED BY A GROUND FAULT CIRCUIT INTERRUPTER (GFCI).

INSTALLER

TOOLS REQUIRED

BUT NOT PROVIDED:

SAFETY GLASSES

GLOVES

3/4” WRENCH OR CRESCENT

WRENCH

5/16” NUT DRIVER

UTILITY KNIFE

TAPE MEASURE

PENCIL

CENTER PUNCH

1/2” SOCKET & RATCHET WRENCH

5/32” ALLEN WRENCH

7/64” ALLEN WRENCH

LZWSRK -EZH2O RETRO-FIT BOTTLE FILLING UNIT

Need help?

Do you have a question about the Elkay LZWSR 1C Series and is the answer not in the manual?

Elkay LZWSR 1C Series Specifications

General